|
DIMINISHING
SECTION STEEL CONCEALED HALYARD GROUND SET FLAG POLE |
|
When the desired exposed height of a
flagpole exceeds 80' or for many of the installation involving a
large flagpole and flag on the roof of a tall building, heavy
wall sectional steel flagpoles are the only answer to meet the
structural needs for an installation of that magnitude. All sectional steel flagpoles are engineered to meet ANSI/NAAMM
FP-1001-97 Guide Specifications for Design Loads of Metal
Flagpoles. All sizes listed below are designed using wind loads
of 130 mph unflagged and 90 mph flagged 2itht he flag size
listed.
Each steel flagpole is
constructed from A-36 carbon steel with a yield point of 36,000
PSI. At each section, steel diameter reducers are also
applied to give the overall flagpole a tapered-like
appearance. A heavy duty, 18" diameter combination
Ball/Truck assembly which utilizes dual sealed precision
bearings on a stainless steel spindle and finished in a long
lasting gold powder coat is standard equipment. The
stainless steel gearless winch is protected behind a lockable
door. |
 |
|
SPECIFICATIONS |
|
sectional steel flagpoles can be used to
achieve greater heights. The diminishing
sections give the illusion of a conical
taper. A circumferential field weld is
required to join the shipping sections. |
| FINISH:
All steel flagpoles are polished to a
smooth texture and painted with a powdercoat
paint finish. Touch up paint is included
for the field joints. Standard colors
include: black, white, silver and dark bronze. |
|
|
STANDARD
FITTINGS |
| FINIAL:
Heavy Duty Truck-Ball Assembly |
| TRUCK:
Heavy duty, cast aluminum, internal halyard
type, revolving non-fouling, equipped with two
automotive type sealed bearing assemblies and
stainless steel spindle. |
| HALYARD:
Halyard and flag arrangement are 1/8" and
5/32" stainless steel aircraft cable, with
attachment ends crimped over 1/8" steel
yokes and joined by a stainless steel quick
link. Cable is two-piece, joined by a
stainless steel swivel at mid-point. The
flag arrangement is sized to accommodate an
appropriate size flag and is supplied complete
with two heavy duty swivel snaps, shock spring,
plastitol coated counterweight, and beaded-nylon
retainer ring. |
| WINCH:
Stainless steel, direct drive, accessible for
maintenance only through a reinforced access
opening, which is covered by a removable door
finished to match flagpole shaft and contains a
six tumbler cylinder lock. Winch is gearless,
operable only by a removable crank handle and
locks in any position upon removal of the crank
handle. |
| FOUNDATION
SLEEVE: Fabricated from 16 ga.
galvanized steel, with a steel base plate whose
square dimension is 4" larger than the I.D.
of the sleeve. A setting plate 6" square is
securely8 welded to the ground spike 6"
below the base plate. The ground spike is
3/4" diameter and 36" in length. |
|
|
 Installation
Instructions
|
| EXPOSED
HEIGHT |
BUTT
DIAMETER |
TOP
DIAMETER |
SHIP
SECTIONS |
FLAG
SIZE |
SHIPPING
WEIGHT |
| 100' |
14" |
6.625" |
3 |
30'x50' |
5393# |
| 120' |
14" |
6.625" |
4 |
30'x50' |
7957# |
| 130' |
18" |
6.625" |
4 |
30'x60' |
9804# |
| 140' |
20" |
8.625" |
5 |
30'x60' |
11496# |
| 150' |
24" |
10.00" |
5 |
30'x60' |
13397# |
|
|
CALL FOR
PRICING. 1.888.317.4594
Color
Choices: White,
Classic Gray,
Black,
Dark Brown,
Red,
Blue,
Yellow ***
Electric Winches are available for 140' & 150' poles ***
Optional Flagpole Lighting
Accessory
|
Item No.
AGCOMLGT07
|
(Rec
Use: 100’ - 150’ pole heights)
|
|
FIXTURE
HOUSING -
Powder coated, Die Cast housing with a formed aluminum
lid.
LENS -
Tempered flat glass lens and gasket with aluminum
clamp band.
LAMP 1500
Watt Metal Halide
BALLAST -
This unit is equipped with Multi-tap ballast
120V,208V,240V,277V
OPTICS -
Spun anodized aluminum reflector available in
Type 3 optics.
|
|
|
Optional
Accessories:
|
|
Pole/Tenon
Slipfitter
|
|
|
|
|
Wall Mount
Bracket w/Tenon Slip fitter
|
|
 |
|
* Lighting
Fixture requires installation by Certified Electrician
Only *
|
|
|
Company
Information and Policy